Wuhan plastic bucket wholesale
For the newly bought plastic bucket, put two pieces of fresh lemon into the cup, put the quilt in the bucket, and then cover it for a few hours; Wipe the inner wall of the plastic bucket with soaked tea, and wash it with clean water to remove the peculiar smell in the bucket; In addition, use a few milliliters of salt dipped in water to scrub inside the bucket to remove odor. Through the above tips, you can effectively remove the odor of newly bought plastic barrels. As an enterprise specializing in the production of various plastic barrels, we are very cautious in the selection of raw materials, in order to reduce the impact of the odor of plastic barrels on purchasing judgment. If there is anything that consumers do not understand about the removal of odor from plastic barrels, they can contact us, and we are happy to serve you.
Wuhan plastic bucket wholesale
How to deal with cracks in the plastic bucket? Generally, in the process of manufacturing 200L plastic barrel, the materials used are basically polyethylene, polyester and other plastics, which are then processed by blow molding. In practice, we can use 200L plastic barrels to hold glacial acetic acid, petroleum dangerous goods, acid and alkali corrosive drugs, etc. In general, it has many advantages. For example, in practice, using this 200L plastic bucket is not only not easy to damage and rust, but also relatively simple and sensitive. In addition, it also has excellent oil resistance and strong corrosion resistance. Therefore, in terms of current application, we can use this plastic bucket to package dangerous goods. Its primary characteristics are non fragile, non rusting, oil resistant, corrosion resistant, thermal insulation and moisture-proof. In addition, after the materials are loaded, we can also fold, stack, store, transport, stack and can 200L plastic barrels according to the order and requirements. In this way, not only can users save a lot of space, but also can save some data. This data actually belongs to macromolecular organic compounds, which can exist in various forms, such as liquid, solid, colloid, solution, etc. The capacity of plastic bucket is different due to the different contents of plastic bucket. In addition, 200L plastic bucket can be manufactured by different processing methods. Generally, the materials used can be divided into thermosetting and thermoplastic materials. However, the former cannot be depicted from scratch, while the latter can be used repeatedly in production.
Wuhan plastic bucket wholesale
1： Measurement of the overall height of the plastic bucket. The overall height of the plastic bucket refers to the vertical distance from the bottle mouth to the bottom of the bottle. The measurement method is to place the plastic bucket on a horizontal plane, contact one end of the vernier caliper with the extreme high point of the bottle mouth, rotate the bottle body 360 degrees, read the maximum and minimum values respectively, and compare the data with the size of the design drawing to see whether they are consistent. If the specification of the plastic bucket is 40-60ml, its height should be controlled within ± 0.5mm. 2： Measurement of the outer diameter of the plastic bucket mouth. For the measurement of this part, the method is to span the scale of the measuring tool across the center of the bottle mouth, avoid the position of the mold closing line of the bottle body, rotate the circular bottle mouth 360 degrees with the main shaft close to the thread of the mouth, measure the maximum and minimum values, and compare with the bottle design drawings. The external diameter error should be controlled within ± 0.1mm. 3： Measurement of the overall diameter of the plastic bucket. For the measurement of this part, the method is to use the measuring surface of the vernier caliper to contact the measuring position of the maximum outer diameter of the bottle body, close the vernier caliper, rotate the plastic can body 360 degrees, and read the maximum and minimum values. The error of its overall diameter should be controlled within 0. 1mm. 4： Measurement of the wall thickness of each part of the plastic barrel. For the pharmaceutical plastic barrel with a circular revolving body, cut the measuring area of the symmetrical part with a knife, so that the measuring tool can enter the detection point where each part of the bottle can be measured. Strictly measure the symmetrical part of the thickness of the plastic barrel mouth, shoulder, body, and bottle bottom, and read the maximum and minimum values, Compare with the design drawing data, and check whether the tolerance of thickness dimensions of each part of the plastic bucket is within the standard range.
Wuhan plastic bucket wholesale
First, the outer cover needs to be tightened when installing (usually with the help of external force such as wrench). After the installation of the seal ring, it should be close to the contact plane of the barrel mouth to prevent the seal ring from distorting the installation. If the temperature of the filled product is higher than 40 ℃, the cap shall be screwed and stacked after the product is cooled. When stacking, pay attention to ensure the flatness. The upper base layer with large contact area shall be aligned, and the stacking shall not be staggered to avoid deformation of the plastic bucket. The weight or specific gravity of the dangerous goods contained in the chemical barrel shall not exceed the larger weight or specific gravity of the contents that can be carried. It is not allowed to use plastic drums with low hazard class to pack dangerous goods in places where high hazard class packaging is required. If the plastic drum without vent hole is used for shipment, it will release gas during storage and transportation. The single weight or volume of dangerous goods contained in the barrel shall not exceed the high limit of the world rules for dangerous goods transportation. During loading, unloading and transportation, it is necessary to avoid falling and collision with hard and sharp objects. When loading dangerous goods, do not corrode or damage the appearance of the plastic barrel.
Wuhan plastic bucket wholesale
The reason why the plastic bucket is not broken is that it is a high molecular organic compound? Although it is called plastic bucket, and the material is also plastic, plastic can also be divided into several kinds of plastics. For example, plastic buckets are mainly made of polyethylene, polyester and other plastics by blow molding, which are mostly used to contain glacial acetic acid, tert butyl peroxide, petroleum dangerous goods, acid and alkali corrosive drugs, etc. It has outstanding characteristics, such as non fragile, non rusting, light weight, and excellent oil resistance and strong corrosion resistance. Plastic barrel plastics can be divided into thermosetting and thermoplastic. The former can not be re described and used, while the latter can be produced repeatedly. Plastic barrels are mostly used for packaging dangerous goods, which are not fragile, rustproof, oil resistant, corrosion resistant, heat preservation and moisture proof. It is mainly used to contain dangerous goods such as glacial acetic acid, tert butyl peroxide and petroleum accumulation, which are highly corrosive drugs such as acid and alkali. Plastic buckets are folded, stacked, stored, transported, stacked and canned, which greatly saves space and data in the whole process. Light weight, cold resistance, corrosion resistance, pollution reduction, super clean, meet the requirements of medical testing.
