Zhejiang plastic water tank price
Chemical plastic bucket has good heat resistance and cold resistance, good hardness, tensile strength, electrical insulation performance and toughness, and good chemical stability. It is almost insoluble in any organic solvent at room temperature, resistant to corrosion of various acid, alkali and salt solutions, and has excellent resistance to environmental stress cracking and thermal stress cracking. Its surface hardness is high, Good dimensional stability. Chemical plastic bucket is easy to use, economical and durable. With the development of internationalization, plastic bucket has gradually become the mainstream product of liquid packaging. It can contain Class II and III dangerous goods. The liquid density for Class II dangerous goods is 1.5g/cm3, and the liquid density for Class III dangerous goods is 1.8g/cm3. The product structure is reasonable, firm and solid, which can be directly loaded and unloaded by forklift, and can be stacked and stored. The plastic container is light and not fragile. Chemical plastic buckets, plastic pots and bottles for daily food storage are mostly made of polyethylene or polypropylene, of which polyethylene is more common. PVC can also be made into containers such as barrels and basins, but like film, it cannot hold food, especially oil and wine. There are also pulse formaldehyde plastics commonly known as "Dianyu" and melamine formaldehyde plastics commonly known as "melamine". The raw materials contain formaldehyde. In the production process, if the polymerization is not good, free formaldehyde may appear in tableware. Formaldehyde is a highly toxic substance. If it is mixed with food, it will seriously damage human health. Therefore, good quality "electric jade" and "melamine" tableware and containers must be used. For inferior products, the relevant departments should strictly check to prevent them from coming out of the cage. Although polyethylene container can be used to hold food, it should also be noted when it is used to hold oil. Because polyethylene is soluble in oil, if it is stored for a long time, the color and taste of edible oil will also change, and even cannot be eaten, which is harmful to health.
Zhejiang plastic water tank price
Blow molding is also one of the processing methods for making plastic barrels. More than 1/3 of HDPE in the United States is used for blow molding. The characteristics of blow molding grades, such as melt strength, ES-CR and toughness, are similar to those used for sheet and thermoforming applications, so similar grades are acceptable. Most thermoplastics can be blow molded, and high-density polyethylene is a blow molding material that is widely used. Plastics suitable for blow molding include polyethylene, polyvinyl chloride, polypropylene, polyester, etc. Now there are also multi-layer blow molding and stretch blow molding. It is very reliable and convenient to use the above methods to process plastic barrels, and the manufacturer is constantly developing new processing methods. I believe that in the future, the processing of plastic barrels will be more and more perfect, and the quality of plastic barrels will be more reliable.
Zhejiang plastic water tank price
Next, the plastic bucket manufacturer will tell you how to prolong its service life as much as possible. As a widely used container, plastic bucket has been recognized by more people, and its use is very convenient. However, attention should be paid to how to extend its service life. Pay more attention during the storage of plastic buckets, so that they can be used longer. The chemical reaction of plastic bucket exposed to the sun is caused by many factors. First, ultraviolet radiation, the leading element of photochemical reaction, can directly cause the cracking of molecular chains. In all the light, the shorter the wavelength and the greater the energy, the faster the aging of the plastic bucket. Because rubber and plastic materials will produce free groups when absorbing light energy, and then cause and accelerate some adverse chain reactions.
Zhejiang plastic water tank price
The method to deal with bubbles in plastic bucket production is to increase injection energy, pressure, speed, time and material amount, and increase back pressure to make the mold full. Increase material temperature and flow smoothly. Reduce the material temperature and shrinkage, and advance the mold temperature properly, especially the part of mold temperature that constitutes the vacuum bubble. The gate is set at the thick part of the workpiece to improve the activity of the nozzle, runner and gate and reduce the consumption of pressing. Improve the mold exhaust condition. The uneven movement of plastic in the mold makes the air trapped in it. When the plastic enters the warm air workshop, the moisture will condense on the cold plastic. The recommended remedy is to dry the plastic. Store the polymer in the workshop for at least six hours before injection molding. The plastic bucket is used to store all kinds of liquids. When we install the liquid and screw the vent cover, we need to lie on the side for one minute first, so that the vent film can be stored vertically after soaking the liquid. The storage temperature of the plastic bucket should also be noted, which is generally about 40~50 ℃. After a certain period of storage, check whether there is expansion. If the bulge is serious, it means that the ventilation cap is not applicable
Zhejiang plastic water tank price
The plastic bucket for holding water is made of PE raw material, and its composition is attributed to linear low-density polyethylene particles. The plastic bucket made of this raw material is very healthy and environmentally friendly, and meets the national food safety standards. It not only has rigidity and resistance, but also has advantages such as high temperature and cold resistance. Generally speaking, plastic buckets have two purposes, one is to hold water, the other is to hold some corrosive liquids, so their choice of raw materials is different. Plastic buckets used to hold water should be environmentally friendly, green and healthy; The drums for storing corrosive liquids are required to be resistant to acid and alkali and corrosion. Plastic bucket is widely used in civil, agriculture and industry, and its scale of use can be classified as follows: 1. Civil: it is used to store and supplement at night (urban water consumption is low) because of drinking water supply problems, and it is used to make up for the overall water supply system when water consumption is serious; 2. Agriculture: when the rain is scarce, it is used to make up for the water content of farmland crops and drinking water for farm animals; 3. Industry: It is used to store industrial raw materials, and has ambitions for various acidic and alkaline industrial raw materials. Plastic buckets are ubiquitous in our lives. Because of their strong adaptability to the environment and high tear resistance, plastic buckets are loved by modern people, widely used in some factories, enterprises and individual families, and have been recognized and praised all the time.
