Xi'an plastic water tank price
The plastic bucket will leak after a long time of use. If we find a small hole after inspection, we can use adhesive to repair it. If the hole is relatively large, this method is not feasible. At this time, we can find some special tools for plastic welding to repair. Or use some suitable plastic buckets to weld to the leaking place. The above methods are aimed at the non serious water leakage phenomenon, so these methods are relatively simple and not applicable to those with serious water leakage. If it is a very serious water leakage, even if the welding method is used, it will work for a while, but it will still leak after a period of use. In this case, we recommend that you use a new plastic bucket to avoid serious water leakage. In addition, to prevent people from using plastic buckets, In the process of use, everyone should pay attention to the maintenance of the plastic bucket. Do not break it in use, which will shorten the service life of the plastic bucket.
Xi'an plastic water tank price
How to deal with cracks in the plastic bucket? Generally, in the process of manufacturing 200L plastic barrel, the materials used are basically polyethylene, polyester and other plastics, which are then processed by blow molding. In practice, we can use 200L plastic barrels to hold glacial acetic acid, petroleum dangerous goods, acid and alkali corrosive drugs, etc. In general, it has many advantages. For example, in practice, using this 200L plastic bucket is not only not easy to damage and rust, but also relatively simple and sensitive. In addition, it also has excellent oil resistance and strong corrosion resistance. Therefore, in terms of current application, we can use this plastic bucket to package dangerous goods. Its primary characteristics are non fragile, non rusting, oil resistant, corrosion resistant, thermal insulation and moisture-proof. In addition, after the materials are loaded, we can also fold, stack, store, transport, stack and can 200L plastic barrels according to the order and requirements. In this way, not only can users save a lot of space, but also can save some data. This data actually belongs to macromolecular organic compounds, which can exist in various forms, such as liquid, solid, colloid, solution, etc. The capacity of plastic bucket is different due to the different contents of plastic bucket. In addition, 200L plastic bucket can be manufactured by different processing methods. Generally, the materials used can be divided into thermosetting and thermoplastic materials. However, the former cannot be depicted from scratch, while the latter can be used repeatedly in production.
Xi'an plastic water tank price
The reason why the plastic bucket is not broken is that it is a high molecular organic compound? Although it is called plastic bucket, and the material is also plastic, plastic can also be divided into several kinds of plastics. For example, plastic buckets are mainly made of polyethylene, polyester and other plastics by blow molding, which are mostly used to contain glacial acetic acid, tert butyl peroxide, petroleum dangerous goods, acid and alkali corrosive drugs, etc. It has outstanding characteristics, such as non fragile, non rusting, light weight, and excellent oil resistance and strong corrosion resistance. Plastic barrel plastics can be divided into thermosetting and thermoplastic. The former can not be re described and used, while the latter can be produced repeatedly. Plastic barrels are mostly used for packaging dangerous goods, which are not fragile, rustproof, oil resistant, corrosion resistant, heat preservation and moisture proof. It is mainly used to contain dangerous goods such as glacial acetic acid, tert butyl peroxide and petroleum accumulation, which are highly corrosive drugs such as acid and alkali. Plastic buckets are folded, stacked, stored, transported, stacked and canned, which greatly saves space and data in the whole process. Light weight, cold resistance, corrosion resistance, pollution reduction, super clean, meet the requirements of medical testing.
Xi'an plastic water tank price
The method to deal with bubbles in plastic bucket production is to increase injection energy, pressure, speed, time and material amount, and increase back pressure to make the mold full. Increase material temperature and flow smoothly. Reduce the material temperature and shrinkage, and advance the mold temperature properly, especially the part of mold temperature that constitutes the vacuum bubble. The gate is set at the thick part of the workpiece to improve the activity of the nozzle, runner and gate and reduce the consumption of pressing. Improve the mold exhaust condition. The uneven movement of plastic in the mold makes the air trapped in it. When the plastic enters the warm air workshop, the moisture will condense on the cold plastic. The recommended remedy is to dry the plastic. Store the polymer in the workshop for at least six hours before injection molding. The plastic bucket is used to store all kinds of liquids. When we install the liquid and screw the vent cover, we need to lie on the side for one minute first, so that the vent film can be stored vertically after soaking the liquid. The storage temperature of the plastic bucket should also be noted, which is generally about 40~50 ℃. After a certain period of storage, check whether there is expansion. If the bulge is serious, it means that the ventilation cap is not applicable
Xi'an plastic water tank price
1： Measurement of the overall height of the plastic bucket. The overall height of the plastic bucket refers to the vertical distance from the bottle mouth to the bottom of the bottle. The measurement method is to place the plastic bucket on a horizontal plane, contact one end of the vernier caliper with the extreme high point of the bottle mouth, rotate the bottle body 360 degrees, read the maximum and minimum values respectively, and compare the data with the size of the design drawing to see whether they are consistent. If the specification of the plastic bucket is 40-60ml, its height should be controlled within ± 0.5mm. 2： Measurement of the outer diameter of the plastic bucket mouth. For the measurement of this part, the method is to span the scale of the measuring tool across the center of the bottle mouth, avoid the position of the mold closing line of the bottle body, rotate the circular bottle mouth 360 degrees with the main shaft close to the thread of the mouth, measure the maximum and minimum values, and compare with the bottle design drawings. The external diameter error should be controlled within ± 0.1mm. 3： Measurement of the overall diameter of the plastic bucket. For the measurement of this part, the method is to use the measuring surface of the vernier caliper to contact the measuring position of the maximum outer diameter of the bottle body, close the vernier caliper, rotate the plastic can body 360 degrees, and read the maximum and minimum values. The error of its overall diameter should be controlled within 0. 1mm. 4： Measurement of the wall thickness of each part of the plastic barrel. For the pharmaceutical plastic barrel with a circular revolving body, cut the measuring area of the symmetrical part with a knife, so that the measuring tool can enter the detection point where each part of the bottle can be measured. Strictly measure the symmetrical part of the thickness of the plastic barrel mouth, shoulder, body, and bottle bottom, and read the maximum and minimum values, Compare with the design drawing data, and check whether the tolerance of thickness dimensions of each part of the plastic bucket is within the standard range.
