Guiyang plastic water tank wholesale
At present, there are many kinds of packaging products on the market, among which plastic packaging barrels are more common. With more and more types of plastic packaging barrels, the market pressure also increases, and the brands and product characteristics of various manufacturers are also diverse. Now let's talk about the performance of plastic packaging barrels. 1. Corrosion resistance: the plastic bucket with corrosion resistance shall not have any crack, blister or deformation after being immersed for 48 hours in the corrosive chemicals with temperature maintained at 75 ℃. 2. Aging resistance: ⑴ Material aging resistance: aging time (h) Impact strength change rate after artificial aging 6000 ≤ 40% ⑵ Inject high-quality UV resistant raw materials, color pigment 5%, and ensure 8 years (outdoor) without fading. 3. Hardness index: ≥ 65. 4. Cold and heat resistance: working temperature: - 30 ℃~50 ℃. Destructive test: - 30 ℃~110 ℃ (softening temperature). Detailed description: The plastic bucket will be refrigerated at - 18 ℃ for 12 hours at first, and then a 65mm diameter and 5kg weight iron pillar will be used to drive down from 1m height to the injection point of the plastic trash can for three consecutive times. After the low temperature test, the plastic bucket body should not be cracked or deformed. 5. High temperature resistance: put the plastic bucket into a room with a temperature of 90-95 ℃ for 3 days. After cooling, the surface of the plastic bucket shall not be damaged, blistered or deformed. The moisture absorption of raw materials is less than 0.01 to ensure that the box structure will not become brittle and deformed. 6. Lifting and dumping: place in the calibration environment for more than 12h, add 120kg load, and continuously lift, dump, and drop for more than 2000 times without cracks. In addition, the static test shall be carried out on the empty and loaded plastic drums on the inclined surface with an inclination angle of 100, and the plastic drums shall not be dumped. 7. UV protection and hardness test: from the perspective of engineering plastics, the UV protection components in raw materials are closely related to the hardness of plastic drums. In addition, the intensity of ultraviolet light in every corner of the world is different. And in the same place, different colors have different reactions to ultraviolet rays. 8. Barrel wall thickness: from the perspective of engineering plastics, the barrel wall thickness is not the main reason for determining the toughness of the barrel. The raw materials used, UV protection ingredients, molds and injection molding equipment are all related. For most customers, the quality of the plastic bucket does not depend on the wall thickness but whether the plastic bucket can pass different test conditions. The wall thickness depends on the design of each mold.
Guiyang plastic water tank wholesale
How to restore the gloss of the surface of plastic packaging barrels? First, the reason for the mold: whether the cooling system of the mold has water leakage, or whether the sealing system of the mold has been damaged due to corrosion due to long-term operation. If there is water leakage in a single direction of the mold, and the leaking water flows into the mold, causing the barrel wall to be dull, it is only necessary to replace the sealing strip to deal with the problem of water leakage in the plastic barrel. If the exhaust system of the mold is not good, which leads to excessive gas remaining in the mold during production, causing the brightness of the barrel wall to decline, then it is necessary to check the exhaust system of the repair mold. Of course, it may also be the problem of raw materials. First, understand its materials and functions, and adjust a reasonable process formula. If the sol fluidity of the material after heating is poor, the barrel wall will appear to be not bright enough. Properly add some low-pressure resins, improve the barrel temperature, and deal with other related problems.
Guiyang plastic water tank wholesale
The plastic bucket will leak after a long time of use. If we find a small hole after inspection, we can use adhesive to repair it. If the hole is relatively large, this method is not feasible. At this time, we can find some special tools for plastic welding to repair. Or use some suitable plastic buckets to weld to the leaking place. The above methods are aimed at the non serious water leakage phenomenon, so these methods are relatively simple and not applicable to those with serious water leakage. If it is a very serious water leakage, even if the welding method is used, it will work for a while, but it will still leak after a period of use. In this case, we recommend that you use a new plastic bucket to avoid serious water leakage. In addition, to prevent people from using plastic buckets, In the process of use, everyone should pay attention to the maintenance of the plastic bucket. Do not break it in use, which will shorten the service life of the plastic bucket.
Guiyang plastic water tank wholesale
The common cooling shaping plastic barrel is the later stage of the injection molding process, starting from the freezing of the gate and ending with the demoulding of the product. At this stage, feeding or backflow will not continue, and the plastics in the cavity will continue to cool, harden and shape. When demoulding, the plastic parts have enough rigidity to prevent warping and deformation. The plastic bucket produced by this method has many advantages as well as some disadvantages. If the plastic bucket manufacturer will encounter a series of flow resistance in the injection process, part of the resistance comes from the external friction of the barrel, nozzle, mold gating system and mold cavity surface wall against the melt, and the other part comes from the viscous internal friction generated inside the melt itself. In order to overcome the flow resistance, the injection machine must apply a large injection pressure to the melt through the screw or plunger. This is not a big problem, as long as you pay attention to this problem can also be avoided!
