Hefei plastic water tank price
The forming time of the barrel has a great impact on the size of the mold! Plastic part structure The shape, size, wall thickness, presence or absence of inserts, the number and distribution of inserts have a great impact on the shrinkage. Generally speaking, plastic parts are complex in shape, small in size, thin in wall, with inserts, a large number of inserts and symmetrical distribution, and their shrinkage is small. The cooling and shaping process starts from the freezing of the gate to the demoulding of the product, which is a stage of the injection molding process. At this stage, feeding or backflow will not continue, and the plastics in the cavity will continue to cool, harden and shape. When demoulding, the plastic parts have enough rigidity to avoid warping and deformation. As the cooling process proceeds, the temperature continues to drop, and the plastic shrinkage pressure in the cavity drops to a lower value (but not necessarily equal to the outside atmospheric pressure) when the mold is opened.
Hefei plastic water tank price
Bubbles sometimes appear in the production of plastic barrels. What will the production personnel do? Let the plastic bucket wholesale to answer for you. After the plastic bucket is filled with liquid, screw the vent cap, lie on the side for 1 minute, make the permeable film soak the liquid, and then store the plastic bucket vertically for 3-7 days or longer. The specific test time needs to be determined by oneself, and the temperature should follow the temperature under the practical application state (the bucket is placed in the oven after the liquid is filled). The storage temperature of the plastic bucket is generally 40-50 ℃. When the expected time is up, check whether the bucket expands. If there is slight swelling, the demander will decide whether to use it; If there is serious bulge, it is determined that this ventilation cover is not applicable.
Hefei plastic water tank price
When the surface of the plastic bucket is labeled, the labeling surface should be flat. A "frame" can be designed on the surface of the plastic bottle, so that the label can be positioned accurately without movement. During blow molding, the first contact part of parison inflation always tends to be the first hardened part. Therefore, the wall thickness of this part is also larger. The edge and corner are the parts where parison inflation contacts, and the wall thickness of this part is small. Therefore, the edges and corners of plastic bottles should be designed as rounded corners. The rigidity and bending resistance of plastic bottles can be improved by changing the surface shape of the plastic bottle, such as making the middle of the plastic bottle relatively thin, and increasing the circumferential grooves or ribs on the surface of the plastic bottle. The longitudinal grooves or stiffeners can eliminate the deviation, sagging or deformation of plastic bottles under long-term load. The printing surface of the plastic bucket is where consumers focus their attention. The printing surface shall be flat and continuous; If the plastic bottle contains a handle, a groove, a reinforcing rib and other structures, attention should be paid not to inconvenience the printing operation during the design. The elliptical plastic bottle has high rigidity, but the manufacturing cost of the mold is high. Therefore, in order to ensure the rigidity of the plastic bottle, in addition to selecting materials with high rigidity, it is also necessary to enhance the rigidity and load resistance strength of the plastic bottle through the shape design of the plastic bottle.
Hefei plastic water tank price
The plastic bucket will leak after a long time of use. If we find a small hole after inspection, we can use adhesive to repair it. If the hole is relatively large, this method is not feasible. At this time, we can find some special tools for plastic welding to repair. Or use some suitable plastic buckets to weld to the leaking place. The above methods are aimed at the non serious water leakage phenomenon, so these methods are relatively simple and not applicable to those with serious water leakage. If it is a very serious water leakage, even if the welding method is used, it will work for a while, but it will still leak after a period of use. In this case, we recommend that you use a new plastic bucket to avoid serious water leakage. In addition, to prevent people from using plastic buckets, In the process of use, everyone should pay attention to the maintenance of the plastic bucket. Do not break it in use, which will shorten the service life of the plastic bucket.
Hefei plastic water tank price
The common cooling shaping plastic barrel is the later stage of the injection molding process, starting from the freezing of the gate and ending with the demoulding of the product. At this stage, feeding or backflow will not continue, and the plastics in the cavity will continue to cool, harden and shape. When demoulding, the plastic parts have enough rigidity to prevent warping and deformation. The plastic bucket produced by this method has many advantages as well as some disadvantages. If the plastic bucket manufacturer will encounter a series of flow resistance in the injection process, part of the resistance comes from the external friction of the barrel, nozzle, mold gating system and mold cavity surface wall against the melt, and the other part comes from the viscous internal friction generated inside the melt itself. In order to overcome the flow resistance, the injection machine must apply a large injection pressure to the melt through the screw or plunger. This is not a big problem, as long as you pay attention to this problem can also be avoided!
