Handan plastic water tank wholesale
Chemical plastic bucket has good heat resistance and cold resistance, good hardness, tensile strength, electrical insulation performance and toughness, and good chemical stability. It is almost insoluble in any organic solvent at room temperature, resistant to corrosion of various acid, alkali and salt solutions, and has excellent resistance to environmental stress cracking and thermal stress cracking. Its surface hardness is high, Good dimensional stability. Chemical plastic bucket is easy to use, economical and durable. With the development of internationalization, plastic bucket has gradually become the mainstream product of liquid packaging. It can contain Class II and III dangerous goods. The liquid density for Class II dangerous goods is 1.5g/cm3, and the liquid density for Class III dangerous goods is 1.8g/cm3. The product structure is reasonable, firm and solid, which can be directly loaded and unloaded by forklift, and can be stacked and stored. The plastic container is light and not fragile. Chemical plastic buckets, plastic pots and bottles for daily food storage are mostly made of polyethylene or polypropylene, of which polyethylene is more common. PVC can also be made into containers such as barrels and basins, but like film, it cannot hold food, especially oil and wine. There are also pulse formaldehyde plastics commonly known as "Dianyu" and melamine formaldehyde plastics commonly known as "melamine". The raw materials contain formaldehyde. In the production process, if the polymerization is not good, free formaldehyde may appear in tableware. Formaldehyde is a highly toxic substance. If it is mixed with food, it will seriously damage human health. Therefore, good quality "electric jade" and "melamine" tableware and containers must be used. For inferior products, the relevant departments should strictly check to prevent them from coming out of the cage. Although polyethylene container can be used to hold food, it should also be noted when it is used to hold oil. Because polyethylene is soluble in oil, if it is stored for a long time, the color and taste of edible oil will also change, and even cannot be eaten, which is harmful to health.

Handan plastic water tank wholesale
The reason why the plastic bucket is not broken is that it is a high molecular organic compound? Although it is called plastic bucket, and the material is also plastic, plastic can also be divided into several kinds of plastics. For example, plastic buckets are mainly made of polyethylene, polyester and other plastics by blow molding, which are mostly used to contain glacial acetic acid, tert butyl peroxide, petroleum dangerous goods, acid and alkali corrosive drugs, etc. It has outstanding characteristics, such as non fragile, non rusting, light weight, and excellent oil resistance and strong corrosion resistance. Plastic barrel plastics can be divided into thermosetting and thermoplastic. The former can not be re described and used, while the latter can be produced repeatedly. Plastic barrels are mostly used for packaging dangerous goods, which are not fragile, rustproof, oil resistant, corrosion resistant, heat preservation and moisture proof. It is mainly used to contain dangerous goods such as glacial acetic acid, tert butyl peroxide and petroleum accumulation, which are highly corrosive drugs such as acid and alkali. Plastic buckets are folded, stacked, stored, transported, stacked and canned, which greatly saves space and data in the whole process. Light weight, cold resistance, corrosion resistance, pollution reduction, super clean, meet the requirements of medical testing.

Handan plastic water tank wholesale
The plastic bucket for holding water is made of PE raw material, and its composition is attributed to linear low-density polyethylene particles. The plastic bucket made of this raw material is very healthy and environmentally friendly, and meets the national food safety standards. It not only has rigidity and resistance, but also has advantages such as high temperature and cold resistance. Generally speaking, plastic buckets have two purposes, one is to hold water, the other is to hold some corrosive liquids, so their choice of raw materials is different. Plastic buckets used to hold water should be environmentally friendly, green and healthy; The drums for storing corrosive liquids are required to be resistant to acid and alkali and corrosion. Plastic bucket is widely used in civil, agriculture and industry, and its scale of use can be classified as follows: 1. Civil: it is used to store and supplement at night (urban water consumption is low) because of drinking water supply problems, and it is used to make up for the overall water supply system when water consumption is serious; 2. Agriculture: when the rain is scarce, it is used to make up for the water content of farmland crops and drinking water for farm animals; 3. Industry: It is used to store industrial raw materials, and has ambitions for various acidic and alkaline industrial raw materials. Plastic buckets are ubiquitous in our lives. Because of their strong adaptability to the environment and high tear resistance, plastic buckets are loved by modern people, widely used in some factories, enterprises and individual families, and have been recognized and praised all the time.

Handan plastic water tank wholesale
The main features of the chemical plastic bucket are as follows: the product color is bright and round: the imported food grade color masterbatch is used to make the product dyed evenly and the appearance more bright and round; 2. The wall thickness of the whole barrel is uniform and symmetrical: 360 points of wall thickness control skills make the wall thickness of each barrel very uniform; 3. The appearance of the product is clean and smooth: people rely on clothes and horses rely on saddles - each one has a specialist to recheck to ensure that there are no black spots, strains, ribbons, deformation, etc. on the surface of the barrel, so as to improve the beauty; 4. Humanized planning of the whole barrel: each barrel shape fully considers the humanization at the beginning of the planning, making the products more comfortable to carry and more convenient to pour; 5. Diversified sealing methods: aluminum foil induction seal, inner plug seal, chemical foaming seal ring seal, WAKE silicone seal, EPE seal; 6. Excellent chemical stability and anti drop test: ensure the safety of product transportation, especially the transportation of hazardous chemicals; 7. High beauty of the can body: high cost performance and strict control of concave convex deformation, which conforms to the beauty of international review; 8. The first article test of the batch includes: high temperature stacking test, hydraulic leakage test, air tightness test and drop test.

Handan plastic water tank wholesale
1: Measurement of the overall height of the plastic bucket. The overall height of the plastic bucket refers to the vertical distance from the bottle mouth to the bottom of the bottle. The measurement method is to place the plastic bucket on a horizontal plane, contact one end of the vernier caliper with the extreme high point of the bottle mouth, rotate the bottle body 360 degrees, read the maximum and minimum values respectively, and compare the data with the size of the design drawing to see whether they are consistent. If the specification of the plastic bucket is 40-60ml, its height should be controlled within ± 0.5mm. 2: Measurement of the outer diameter of the plastic bucket mouth. For the measurement of this part, the method is to span the scale of the measuring tool across the center of the bottle mouth, avoid the position of the mold closing line of the bottle body, rotate the circular bottle mouth 360 degrees with the main shaft close to the thread of the mouth, measure the maximum and minimum values, and compare with the bottle design drawings. The external diameter error should be controlled within ± 0.1mm. 3: Measurement of the overall diameter of the plastic bucket. For the measurement of this part, the method is to use the measuring surface of the vernier caliper to contact the measuring position of the maximum outer diameter of the bottle body, close the vernier caliper, rotate the plastic can body 360 degrees, and read the maximum and minimum values. The error of its overall diameter should be controlled within 0. 1mm. 4: Measurement of the wall thickness of each part of the plastic barrel. For the pharmaceutical plastic barrel with a circular revolving body, cut the measuring area of the symmetrical part with a knife, so that the measuring tool can enter the detection point where each part of the bottle can be measured. Strictly measure the symmetrical part of the thickness of the plastic barrel mouth, shoulder, body, and bottle bottom, and read the maximum and minimum values, Compare with the design drawing data, and check whether the tolerance of thickness dimensions of each part of the plastic bucket is within the standard range.