Price of Nanyang plastic water tank
The plastic bucket will leak after a long time of use. If we find a small hole after inspection, we can use adhesive to repair it. If the hole is relatively large, this method is not feasible. At this time, we can find some special tools for plastic welding to repair. Or use some suitable plastic buckets to weld to the leaking place. The above methods are aimed at the non serious water leakage phenomenon, so these methods are relatively simple and not applicable to those with serious water leakage. If it is a very serious water leakage, even if the welding method is used, it will work for a while, but it will still leak after a period of use. In this case, we recommend that you use a new plastic bucket to avoid serious water leakage. In addition, to prevent people from using plastic buckets, In the process of use, everyone should pay attention to the maintenance of the plastic bucket. Do not break it in use, which will shorten the service life of the plastic bucket.
Price of Nanyang plastic water tank
What are the functions of resin in plastic bucket production? In the same kind of plastics, when the filler content is high or the inorganic filler in the filler is increased, the shrinkage rate is small. The mold structure that is conducive to improving the molding pressure, increasing the plastic mold filling fluidity and making the plastic part dense can reduce the shrinkage rate of the plastic part. Any process factor that can make the plastic part dense and overflow the low molecular volatile matter before molding can reduce the shrinkage of the plastic part, such as preheating and pressurizing the phenolic plastic before molding. After heating, compacting and mixing in the barrel of the injection machine, the process of transforming loose powder or granular solid into continuous homogenized melt is called plasticization. Homogenization includes four aspects, that is, after the material is plasticized, the composition, density, viscosity and temperature distribution in the melt must be uniform. Metering refers to the preparation work that can ensure the injection machine to discharge the plasticized melt out of the barrel at a constant temperature, pressure and quantity through the plunger or screw, which needs the injection machine to control the plunger or screw during the plasticizing process.
Price of Nanyang plastic water tank
The plastic bucket for holding water is made of PE raw material, and its composition is attributed to linear low-density polyethylene particles. The plastic bucket made of this raw material is very healthy and environmentally friendly, and meets the national food safety standards. It not only has rigidity and resistance, but also has advantages such as high temperature and cold resistance. Generally speaking, plastic buckets have two purposes, one is to hold water, the other is to hold some corrosive liquids, so their choice of raw materials is different. Plastic buckets used to hold water should be environmentally friendly, green and healthy; The drums for storing corrosive liquids are required to be resistant to acid and alkali and corrosion. Plastic bucket is widely used in civil, agriculture and industry, and its scale of use can be classified as follows: 1. Civil: it is used to store and supplement at night (urban water consumption is low) because of drinking water supply problems, and it is used to make up for the overall water supply system when water consumption is serious; 2. Agriculture: when the rain is scarce, it is used to make up for the water content of farmland crops and drinking water for farm animals; 3. Industry: It is used to store industrial raw materials, and has ambitions for various acidic and alkaline industrial raw materials. Plastic buckets are ubiquitous in our lives. Because of their strong adaptability to the environment and high tear resistance, plastic buckets are loved by modern people, widely used in some factories, enterprises and individual families, and have been recognized and praised all the time.
Price of Nanyang plastic water tank
Blow molding is also one of the processing methods for making plastic barrels. More than 1/3 of HDPE in the United States is used for blow molding. The characteristics of blow molding grades, such as melt strength, ES-CR and toughness, are similar to those used for sheet and thermoforming applications, so similar grades are acceptable. Most thermoplastics can be blow molded, and high-density polyethylene is a blow molding material that is widely used. Plastics suitable for blow molding include polyethylene, polyvinyl chloride, polypropylene, polyester, etc. Now there are also multi-layer blow molding and stretch blow molding. It is very reliable and convenient to use the above methods to process plastic barrels, and the manufacturer is constantly developing new processing methods. I believe that in the future, the processing of plastic barrels will be more and more perfect, and the quality of plastic barrels will be more reliable.
Price of Nanyang plastic water tank
Use characteristics of plastic barrels: plastic packaging barrels are mostly used for the packaging of liquid and solid products. They have good performance and quality. They are not easy to rust and break, light in weight, and have excellent oil resistance and strong corrosion resistance. It is mainly used for packaging dangerous goods that need moisture-proof, waterproof, heat insulation, pressure resistance and corrosion resistance. Its material is plastic, such as polyethylene, polyester, etc., which is made by blow molding, injection molding, blistering and roll molding. It is mostly used to contain liquid and solid articles in chemical, pesticide, medicine, food and other industries. The specifications range from 1L-25L open and closed plastic barrels, which can be used for goods storage, transportation and turnover. It will not dissolve harmful substances. PP polypropylene, PC polycarbonate and block copolymer are harmless in themselves, and their melting point is more than two hundred degrees. They will not decompose when boiled. However, many additives will be added in the molding process. In order to enhance toughening, anti-aging and anti-oxidation, they are not toxic in themselves, and the content of food grade additives is strictly required, It is also easy to volatilize. Because the tank is engraved with a capacity height, the filling height can be clearly seen through the transparent tank when filling materials in ton barrels, and the filling amount can be accurately controlled. The tank is made of first-line authentic high-density polyethylene raw materials, and the strength and toughness of the products are purchased.
