Jinan plastic water tank wholesale
Three points are summarized for you, hoping to help you choose high-quality plastic chemical barrels. 1. Look at the material: the material of plastic determines the basic characteristics of plastic containers. Plastic packaging containers with the same or similar shapes may have extremely large differences in use performance due to different materials. The price of plastic barrels is different for different materials. 2. Look at the model: different specifications of plastic barrels have different capacities and bear different pressures, depending on the needs of your own products. 3. Look at the thickness: the thickness is very important under the same capacity, which is mainly determined by the materials in place.
Jinan plastic water tank wholesale
Plastic barrel modification equipment What are the processing equipment for plastics? Plastic barrel modification equipment Plastic modification involves four aspects: raw and auxiliary materials used, processing equipment, modification technology and effect, and specific application. According to the plastic modification process, the processing equipment can generally be divided into four categories: primary mixing, melt mixing, pelletizing and drying. The corresponding equipment is introduced as follows: primary mixing equipment. Primary mixing equipment refers to the equipment used for mixing materials in the non melting state. The equipment used for primary mixing is almost intermittent. There are many types of primary mixing equipment, such as rotary drum mixer, double cone mixer, spiral belt mixer, Z-shaped kneader high-speed mixer, etc., but at present, the two types of widely used plastic mixing processes are Z-shaped kneader and high-speed mixer. Z-shaped kneader Z-shaped kneader, also called double arm kneader, is mainly composed of rotor, mixing chamber and driving device. The rotor is installed in the mixing chamber. The mixing chamber is a steel trough with a W-shaped or saddle shaped bottom. The upper part is provided with a cover and a feeding port, and the lower part is generally provided with a discharge port. The steel trough is jacket type, and heating and cooling medium can be fed into it. Some high-precision mixing chambers are also equipped with vacuum devices, which can discharge moisture and volatile matter during the mixing process. There are two types of rotor installation in the mixing chamber, one is tangential installation and the other is intersecting installation. In tangential installation, the movement traces of the outer edges of the two rotors are tangent; In the intersecting installation, the movement traces of the outer edges of the two rotors are intersecting. During tangential installation, the rotor can rotate in the same direction or in different directions, and the speed ratio between rotors is 1.5:1, 2:1 or 3:1. The rotor installed in intersecting mode can only rotate at the same speed because the outer edge movement traces intersect. The clearance between the outer edge of the rotor installed in an intersecting way and the wall of the mixing chamber is very small, generally about 1mm. In such a small gap, materials will be strongly sheared and squeezed. This effect can be physically modified by filling and blending.
Jinan plastic water tank wholesale
What causes the temperature to be too high when processing plastic buckets? The reason for the high temperature during the processing of the plastic bucket: the volume of the plastic bucket oil tank is too small, the heat dissipation area is not enough, and the cooling device is too small. The high temperature of climate and operating environment causes the oil temperature to rise. The viscosity of the selected oil is not appropriate, the viscosity is large, the viscosity resistance is large, and the leakage will increase if the viscosity is too small, both of which can cause heating temperature rise. The pipeline of the plastic bucket system is too thin and too long, too much bending, and large local pressure loss and pressure loss along the way. The precision of components is not enough and the assembly quality is poor, and the mechanical friction loss between relative motions is large. The fit clearance of the mating parts is too small, or the clearance is too large after use, resulting in large internal and external leakage, resulting in large volume loss. For example, the volume efficiency of the pump is reduced, and the temperature rises quickly. The constant displacement pump oil supply system of the plastic bucket with the oil pump capacity selected according to the fast forward speed will have most of the excess flow flowing back from the overflow valve and generate heat when working. The unloading circuit in the system fails or the oil pump cannot unload when it stops working because no unloading circuit is set. All the flow of the pump overflows at the bottom, causing overflow loss and heating, resulting in temperature rise.
Jinan plastic water tank wholesale
When wholesaling plastic buckets, you must pay attention to the choice of plastic materials! The wholesale orientation of plastic drums can only be carried out in the viscous flow state. Both chain segment orientation and whole chain orientation are thermodynamic non-equilibrium states. When the external force is released, the chain will be in a random state again due to the thermal movement of molecules, which is called solution retrieval. Only when the chain segment or molecular chain after removal is rapidly cooled to the glass transition temperature can the removal space be retained. This "frozen" orientation is only relatively stable, and it will also be slowly de oriented. As the material temperature increases, the recovery will rapidly advance ˉ The orientation of molecular chains will be produced in the melting process of plastics, such as injection and extrusion. The effect of orientation on the product is the anisotropy of properties. The strength and modulus in the orientation direction increase significantly, and the strength and modulus perpendicular to the orientation direction decrease significantly. This is because the atoms of the molecular chain in the orientation direction are bound by chemical bonds, while the force between the molecular chains perpendicular to the orientation direction is the van der Waals force.
Jinan plastic water tank wholesale
Chemical plastic bucket has good heat resistance and cold resistance, good hardness, tensile strength, electrical insulation performance and toughness, and good chemical stability. It is almost insoluble in any organic solvent at room temperature, resistant to corrosion of various acid, alkali and salt solutions, and has excellent resistance to environmental stress cracking and thermal stress cracking. Its surface hardness is high, Good dimensional stability. Chemical plastic bucket is easy to use, economical and durable. With the development of internationalization, plastic bucket has gradually become the mainstream product of liquid packaging. It can contain Class II and III dangerous goods. The liquid density for Class II dangerous goods is 1.5g/cm3, and the liquid density for Class III dangerous goods is 1.8g/cm3. The product structure is reasonable, firm and solid, which can be directly loaded and unloaded by forklift, and can be stacked and stored. The plastic container is light and not fragile. Chemical plastic buckets, plastic pots and bottles for daily food storage are mostly made of polyethylene or polypropylene, of which polyethylene is more common. PVC can also be made into containers such as barrels and basins, but like film, it cannot hold food, especially oil and wine. There are also pulse formaldehyde plastics commonly known as "Dianyu" and melamine formaldehyde plastics commonly known as "melamine". The raw materials contain formaldehyde. In the production process, if the polymerization is not good, free formaldehyde may appear in tableware. Formaldehyde is a highly toxic substance. If it is mixed with food, it will seriously damage human health. Therefore, good quality "electric jade" and "melamine" tableware and containers must be used. For inferior products, the relevant departments should strictly check to prevent them from coming out of the cage. Although polyethylene container can be used to hold food, it should also be noted when it is used to hold oil. Because polyethylene is soluble in oil, if it is stored for a long time, the color and taste of edible oil will also change, and even cannot be eaten, which is harmful to health.
