Xiangyang plastic water tank wholesale
In addition, when the plastic bucket is exposed to light, there will be temperature changes, which can be regarded as heating. The increase of temperature will accelerate the dispersion of oxygen, and then increase its oxidation rate, which will lead to thermal bonding and cracking. In addition, touching the oxygen in the air and even ozone, over fire bonding or molecular chain cracking can accelerate aging, and there are other elements such as water, high-energy radiation The media, etc. Therefore, try not to expose to the sun when using plastic buckets daily. These are the reasons why plastic drums are easy to age summarized by the manufacturer of plastic drums. Plastic buckets can be seen almost everywhere in life. Although their price is not expensive, people should also pay attention when using them. Plastic is a kind of aging material, especially under ultraviolet radiation, its aging speed will be greatly accelerated. Therefore, plastic buckets need to be carefully stored to avoid long-term storage under high temperature, direct sunlight and other environments.
Xiangyang plastic water tank wholesale
What factors will affect the performance of the plastic bucket? At present, plastic buckets are common to us, and everyone will use them. The performance of plastic bucket is very advantageous. You can choose different plastic buckets according to different liquids. The production process of the seemingly simple plastic bucket is not so simple. When producing plastic buckets, the manufacturers of plastic buckets still need to pay attention to some small problems that will affect the performance of the finished plastic buckets, which will greatly reduce the sales rate of plastic buckets. 1. The blowing speed determines the performance of plastic bucket products. 2. The cold temperature time determines the performance of plastic bucket products. 3. The expansion rate determines the performance of plastic bucket products. 4. Uneven longitudinal wall thickness of plastic bucket products determines the performance of products. 5. The performance of plastic bucket products is determined by the uneven horizontal wall thickness. 6. Plasticizing temperature and time determine the performance of plastic bucket products.
Xiangyang plastic water tank wholesale
The plastic bucket for holding water is made of PE raw material, and its composition is attributed to linear low-density polyethylene particles. The plastic bucket made of this raw material is very healthy and environmentally friendly, and meets the national food safety standards. It not only has rigidity and resistance, but also has advantages such as high temperature and cold resistance. Generally speaking, plastic buckets have two purposes, one is to hold water, the other is to hold some corrosive liquids, so their choice of raw materials is different. Plastic buckets used to hold water should be environmentally friendly, green and healthy; The drums for storing corrosive liquids are required to be resistant to acid and alkali and corrosion. Plastic bucket is widely used in civil, agriculture and industry, and its scale of use can be classified as follows: 1. Civil: it is used to store and supplement at night (urban water consumption is low) because of drinking water supply problems, and it is used to make up for the overall water supply system when water consumption is serious; 2. Agriculture: when the rain is scarce, it is used to make up for the water content of farmland crops and drinking water for farm animals; 3. Industry: It is used to store industrial raw materials, and has ambitions for various acidic and alkaline industrial raw materials. Plastic buckets are ubiquitous in our lives. Because of their strong adaptability to the environment and high tear resistance, plastic buckets are loved by modern people, widely used in some factories, enterprises and individual families, and have been recognized and praised all the time.
Xiangyang plastic water tank wholesale
The main features of the chemical plastic bucket are as follows: the product color is bright and round: the imported food grade color masterbatch is used to make the product dyed evenly and the appearance more bright and round; 2. The wall thickness of the whole barrel is uniform and symmetrical: 360 points of wall thickness control skills make the wall thickness of each barrel very uniform; 3. The appearance of the product is clean and smooth: people rely on clothes and horses rely on saddles - each one has a specialist to recheck to ensure that there are no black spots, strains, ribbons, deformation, etc. on the surface of the barrel, so as to improve the beauty; 4. Humanized planning of the whole barrel: each barrel shape fully considers the humanization at the beginning of the planning, making the products more comfortable to carry and more convenient to pour; 5. Diversified sealing methods: aluminum foil induction seal, inner plug seal, chemical foaming seal ring seal, WAKE silicone seal, EPE seal; 6. Excellent chemical stability and anti drop test: ensure the safety of product transportation, especially the transportation of hazardous chemicals; 7. High beauty of the can body: high cost performance and strict control of concave convex deformation, which conforms to the beauty of international review; 8. The first article test of the batch includes: high temperature stacking test, hydraulic leakage test, air tightness test and drop test.
Xiangyang plastic water tank wholesale
The wholesale of plastic drums with polar groups will make the materials hygroscopic. If stabilizers, plasticizers, fillers and other additives in plastics contain hydrophilic groups, polar groups, etc., they will also increase the rate of moisture absorption of materials. The rate of moisture absorption of plastics from the air is also related to the specific surface of materials. The feeding state of plastic materials is mostly granular (thermoplastic) (thermosetting plastic molding powder, some thermoplastic resin powder), with large specific surface area and fast moisture absorption rate from the air. Long term stored plastic is easy to achieve moisture absorption balance and contains more water. Before molding, it must be fully dried, otherwise there will be surface silver filaments, internal bubbles and other defects during the molding of products, and some plastics will be hydrolyzed and degraded, which will cause the hygroscopicity of plastic products under mechanical properties to affect the performance of products, Inhalation of moisture inside the products often acts as a plasticizer, which significantly reduces the wholesale of plastic barrels, changes the mechanical properties, and the plastic with obvious moisture absorption also has an impact on the size of plastic parts.
Xiangyang plastic water tank wholesale
Compared with previous years, this year is a miracle year, because there is no time comparable to this year. Just this year, our plastic buckets have made a new breakthrough, and we have made changes in quality! It has achieved what has been desired in recent years. At present, the plastic barrels of our factory have a long service life. Under the conditions of normal filling, transportation, loading and unloading, the warranty period is 18 months. The technical parameters of the plastic bucket are strictly in accordance with the specifications, and the appearance design and product dimensions of the plastic bucket can also be customized according to the needs. Plastic barrels can be used for hot filling, and the general temperature should not exceed 60 ℃. After hot filling, the lid and stacking shall not be closed until the contents have cooled sufficiently and dropped to room temperature.
