Baoding plastic bucket manufacturer
First, check whether the lid and barrel body of the plastic barrel are matched products when filling, otherwise if the lid and barrel body are not matched, the liquid may leak from the mouth. Liquid temperature shall not be higher than 70 ℃. The storage should be dark, the temperature should be below 40 ℃, and the temperature should not exceed 25 ℃ when loading and transporting. Do not load and transport the plastic packaging barrel immediately after filling the high-temperature liquid. Please do not drag the chemical barrel directly on the ground during the transportation of the filled liquid to avoid abrasion and bruise at the bottom. The correct method is to lift it with both hands or use a forklift wooden pallet for shipment.
Baoding plastic bucket manufacturer
Let me share with you the advantages of using plastic buckets! In terms of convenient use of plastic buckets, the first is the plastic buckets with small capacity and light packaging weight. The main body of this kind of plastic bucket packaging is the function scheme of the handle. It is an important part of the demand thinking of the plastic bucket scheme to make the handle more labor-saving and convenient to use. There is a need for more thoughtful ideas about large capacity plastic buckets. For example, some large plastic waste barrels loaded with wheels are very convenient to push, pull and use. The second is the use of plastic buckets. Plastic barrels are usually quoted at a higher price, and they have been used. For example, many migrant workers use paint plastic buckets to hold clothes, rice and pickles. From the perspective of convenient use, we think that it is necessary to think about convenient cleaning and disinfection of plastic buckets. After all, the recycling rate of plastic drums is also a demand driven direction. Nowadays, recycling of plastic drums is very low. The recycling of plastic bottles involves recovery, equipment and other aspects, and the demand is promoted step by step.
Baoding plastic bucket manufacturer
What are the functions of resin in plastic bucket production? In the same kind of plastics, when the filler content is high or the inorganic filler in the filler is increased, the shrinkage rate is small. The mold structure that is conducive to improving the molding pressure, increasing the plastic mold filling fluidity and making the plastic part dense can reduce the shrinkage rate of the plastic part. Any process factor that can make the plastic part dense and overflow the low molecular volatile matter before molding can reduce the shrinkage of the plastic part, such as preheating and pressurizing the phenolic plastic before molding. After heating, compacting and mixing in the barrel of the injection machine, the process of transforming loose powder or granular solid into continuous homogenized melt is called plasticization. Homogenization includes four aspects, that is, after the material is plasticized, the composition, density, viscosity and temperature distribution in the melt must be uniform. Metering refers to the preparation work that can ensure the injection machine to discharge the plasticized melt out of the barrel at a constant temperature, pressure and quantity through the plunger or screw, which needs the injection machine to control the plunger or screw during the plasticizing process.
Baoding plastic bucket manufacturer
Briefly describe the characteristics of the packaging barrel: 1. When moving, you can also choose the method of horizontal rolling and lateral rotation. 2. It has good anti-corrosion function and is suitable for packaging of various chemical risk products. 3. The residue after dumping is small and simple to clean, which is suitable for repeated use of screens. 4. It has a long service life and can be used for more than 20 times under the normal side of flooding, transportation and loading and unloading. 5. The size meets the requirements of world container transportation, and the 20 foot container can load 80. 6. It can be used for hot filling. One Wengding Warehouse should not catch up with OAC. After hot filling, the lid and stacking shall not be closed until the contents have cooled sufficiently and dropped to room temperature. 7. If it is used to contain easily differentiated chemicals, Danduo should be equipped with Yizi with qi expelling function to prevent the risk of overpressure in Tannuo coating, and the red fork can keep the sealing function of Hanshi night body in mind.
