Yulin plastic water tank manufacturer
Next, the plastic bucket manufacturer will tell you how to prolong its service life as much as possible. As a widely used container, plastic bucket has been recognized by more people, and its use is very convenient. However, attention should be paid to how to extend its service life. Pay more attention during the storage of plastic buckets, so that they can be used longer. The chemical reaction of plastic bucket exposed to the sun is caused by many factors. First, ultraviolet radiation, the leading element of photochemical reaction, can directly cause the cracking of molecular chains. In all the light, the shorter the wavelength and the greater the energy, the faster the aging of the plastic bucket. Because rubber and plastic materials will produce free groups when absorbing light energy, and then cause and accelerate some adverse chain reactions.
Yulin plastic water tank manufacturer
For the newly bought plastic bucket, put two pieces of fresh lemon into the cup, put the quilt in the bucket, and then cover it for a few hours; Wipe the inner wall of the plastic bucket with soaked tea, and wash it with clean water to remove the peculiar smell in the bucket; In addition, use a few milliliters of salt dipped in water to scrub inside the bucket to remove odor. Through the above tips, you can effectively remove the odor of newly bought plastic barrels. As an enterprise specializing in the production of various plastic barrels, we are very cautious in the selection of raw materials, in order to reduce the impact of the odor of plastic barrels on purchasing judgment. If there is anything that consumers do not understand about the removal of odor from plastic barrels, they can contact us, and we are happy to serve you.
Yulin plastic water tank manufacturer
There are several ways to remove the residue on the plastic packaging bucket: because the plastic packaging bucket is made of PE, after using the plastic bucket, there will be a lot of oil stains on the inner wall of the bucket, and it is also very difficult and troublesome to clean. Now, Shandong Zhongcheng Packaging Co., Ltd. will introduce the method to remove the residue of plastic chemical barrels. When we remove the residue on the chemical barrel, whether using polishing water or vinegar, we should ensure that it is soaked for a long time, so as to ensure that the residue in the barrel can be removed. Find a piece of dry cloth dipped with vinegar to cover it on the chemical plastic bucket with residue. After the impurities on the bucket are soaked, use a hard small slice to easily remove the residue of trade.
Yulin plastic water tank manufacturer
When wholesaling plastic buckets, you must pay attention to the choice of plastic materials! The wholesale orientation of plastic drums can only be carried out in the viscous flow state. Both chain segment orientation and whole chain orientation are thermodynamic non-equilibrium states. When the external force is released, the chain will be in a random state again due to the thermal movement of molecules, which is called solution retrieval. Only when the chain segment or molecular chain after removal is rapidly cooled to the glass transition temperature can the removal space be retained. This "frozen" orientation is only relatively stable, and it will also be slowly de oriented. As the material temperature increases, the recovery will rapidly advance ˉ The orientation of molecular chains will be produced in the melting process of plastics, such as injection and extrusion. The effect of orientation on the product is the anisotropy of properties. The strength and modulus in the orientation direction increase significantly, and the strength and modulus perpendicular to the orientation direction decrease significantly. This is because the atoms of the molecular chain in the orientation direction are bound by chemical bonds, while the force between the molecular chains perpendicular to the orientation direction is the van der Waals force.
Yulin plastic water tank manufacturer
First, the outer cover needs to be tightened when installing (usually with the help of external force such as wrench). After the installation of the seal ring, it should be close to the contact plane of the barrel mouth to prevent the seal ring from distorting the installation. If the temperature of the filled product is higher than 40 ℃, the cap shall be screwed and stacked after the product is cooled. When stacking, pay attention to ensure the flatness. The upper base layer with large contact area shall be aligned, and the stacking shall not be staggered to avoid deformation of the plastic bucket. The weight or specific gravity of the dangerous goods contained in the chemical barrel shall not exceed the larger weight or specific gravity of the contents that can be carried. It is not allowed to use plastic drums with low hazard class to pack dangerous goods in places where high hazard class packaging is required. If the plastic drum without vent hole is used for shipment, it will release gas during storage and transportation. The single weight or volume of dangerous goods contained in the barrel shall not exceed the high limit of the world rules for dangerous goods transportation. During loading, unloading and transportation, it is necessary to avoid falling and collision with hard and sharp objects. When loading dangerous goods, do not corrode or damage the appearance of the plastic barrel.
