Zhuhai plastic water tank price
The reason why the plastic bucket is not broken is that it is a high molecular organic compound? Although it is called plastic bucket, and the material is also plastic, plastic can also be divided into several kinds of plastics. For example, plastic buckets are mainly made of polyethylene, polyester and other plastics by blow molding, which are mostly used to contain glacial acetic acid, tert butyl peroxide, petroleum dangerous goods, acid and alkali corrosive drugs, etc. It has outstanding characteristics, such as non fragile, non rusting, light weight, and excellent oil resistance and strong corrosion resistance. Plastic barrel plastics can be divided into thermosetting and thermoplastic. The former can not be re described and used, while the latter can be produced repeatedly. Plastic barrels are mostly used for packaging dangerous goods, which are not fragile, rustproof, oil resistant, corrosion resistant, heat preservation and moisture proof. It is mainly used to contain dangerous goods such as glacial acetic acid, tert butyl peroxide and petroleum accumulation, which are highly corrosive drugs such as acid and alkali. Plastic buckets are folded, stacked, stored, transported, stacked and canned, which greatly saves space and data in the whole process. Light weight, cold resistance, corrosion resistance, pollution reduction, super clean, meet the requirements of medical testing.
Zhuhai plastic water tank price
Let me share with you the advantages of using plastic buckets! In terms of convenient use of plastic buckets, the first is the plastic buckets with small capacity and light packaging weight. The main body of this kind of plastic bucket packaging is the function scheme of the handle. It is an important part of the demand thinking of the plastic bucket scheme to make the handle more labor-saving and convenient to use. There is a need for more thoughtful ideas about large capacity plastic buckets. For example, some large plastic waste barrels loaded with wheels are very convenient to push, pull and use. The second is the use of plastic buckets. Plastic barrels are usually quoted at a higher price, and they have been used. For example, many migrant workers use paint plastic buckets to hold clothes, rice and pickles. From the perspective of convenient use, we think that it is necessary to think about convenient cleaning and disinfection of plastic buckets. After all, the recycling rate of plastic drums is also a demand driven direction. Nowadays, recycling of plastic drums is very low. The recycling of plastic bottles involves recovery, equipment and other aspects, and the demand is promoted step by step.
Zhuhai plastic water tank price
For chemical drums, it is very important to master the temperature. Because temperature has a significant impact on the function of plastic extrusion and parison, improving the extruder temperature can reduce the viscosity of the melt, improve the fluidity of the melt, and improve the screw speed without affecting the mixing and plasticization of plastic. To achieve this goal, we can use electronic temperature controller to make the process temperature stable and save energy significantly. It must be well understood that humidity will affect the drying rate of chemical drums. When the relative humidity in the bucket is low, the pressure difference between the surface and the water vapor in the dryer is large, and the drying speed is fast. The isolation function of chemical drums from oxygen, carbon dioxide, nitrogen and organic solvents can vary by tens or even hundreds of times, and the basic characteristics of plastic containers should be grasped. Therefore, when selecting plastic containers, it is necessary to fully understand that plastic related functional chemical barrels are generally made by molding. Different molding methods often have a great impact on the function and cost of products.
Zhuhai plastic water tank price
Briefly describe the repair method of the damaged packaging barrel: first remove the external dirt on the damaged part of the packaging barrel, first wipe off the dirt with a rag, and then scrape out new debris with a knife. If there is any oil stain, first use hot alkaline water to remove the oil, then wash the alkaline solution with clean water, and then use a knife to scrape the surface. When patching cracks, it is necessary to cut a plastic sheet of the same type that is slightly longer and wider than the crack, and has no aging, and treat the appearance. Then, at the place where the packaging barrel is broken, all of them are glued in order, and wet cloth is used to press them to make the bonding more tight. The packaging barrel is beautiful in appearance, smooth in appearance, seamless in appearance, light in weight, good in strength, impact resistant, non-toxic and tasteless, convenient in transportation, and has a long service life. Under the conditions of normal filling, transportation, loading and unloading, the warranty period is 1.5 years. The technical parameters of the product should strictly comply with the standards, and the product appearance design and product dimensions can also be customized according to the needs. Hot filling can be used, and the general temperature should not exceed 60 ℃. The lid and stacking shall not be closed until the contents have cooled sufficiently and dropped to room temperature. Chemical packaging barrels are mostly made of plastic, commonly known as plastic chemical barrels or plastic chemical barrels. They are developed and blown with scientific formulas. They are beautiful and generous in appearance, prevent leakage, and will not deform. They are ideal for long-distance transportation of packaging materials for chemical products. The chemical packaging barrel has good anti-corrosion performance, and a variety of raw material "O" type sealing rings are selected to meet different filling requirements. The residual amount after dumping is small, and it can be used more than 20 times under normal filling, transportation and loading and unloading conditions. It not only saves energy but also reduces the cost of use.
Zhuhai plastic water tank price
What causes the temperature to be too high when processing plastic buckets? The reason for the high temperature during the processing of the plastic bucket: the volume of the plastic bucket oil tank is too small, the heat dissipation area is not enough, and the cooling device is too small. The high temperature of climate and operating environment causes the oil temperature to rise. The viscosity of the selected oil is not appropriate, the viscosity is large, the viscosity resistance is large, and the leakage will increase if the viscosity is too small, both of which can cause heating temperature rise. The pipeline of the plastic bucket system is too thin and too long, too much bending, and large local pressure loss and pressure loss along the way. The precision of components is not enough and the assembly quality is poor, and the mechanical friction loss between relative motions is large. The fit clearance of the mating parts is too small, or the clearance is too large after use, resulting in large internal and external leakage, resulting in large volume loss. For example, the volume efficiency of the pump is reduced, and the temperature rises quickly. The constant displacement pump oil supply system of the plastic bucket with the oil pump capacity selected according to the fast forward speed will have most of the excess flow flowing back from the overflow valve and generate heat when working. The unloading circuit in the system fails or the oil pump cannot unload when it stops working because no unloading circuit is set. All the flow of the pump overflows at the bottom, causing overflow loss and heating, resulting in temperature rise.
