Price of plastic water tank in Weifang
For the newly bought plastic bucket, put two pieces of fresh lemon into the cup, put the quilt in the bucket, and then cover it for a few hours; Wipe the inner wall of the plastic bucket with soaked tea, and wash it with clean water to remove the peculiar smell in the bucket; In addition, use a few milliliters of salt dipped in water to scrub inside the bucket to remove odor. Through the above tips, you can effectively remove the odor of newly bought plastic barrels. As an enterprise specializing in the production of various plastic barrels, we are very cautious in the selection of raw materials, in order to reduce the impact of the odor of plastic barrels on purchasing judgment. If there is anything that consumers do not understand about the removal of odor from plastic barrels, they can contact us, and we are happy to serve you.
Price of plastic water tank in Weifang
The grain size of the plastic in the plastic bucket is very harmful. The relativity of optical rotation is small or no optical rotation. The surface energy of the plastic bucket is low, which will harm the adhesion of all coatings. Because plastics are not conductive conductors and insulators in China, we cannot immediately carry out different coating on the surface of plastic barrels according to a set of electroplating process technical processing process design standards. Therefore, before the problem of information resource management on the surface of plastic barrels, it should be solved before social development, In order to better improve the bonding property of commercial coating and provide a conductive layer with excellent bonding property in coating solution. The front solution includes plastic product surface degreasing, vegetable oil cleaning, film remover, and active plastic product surface to improve coating adhesion. (1) Degrease the plastic bucket. Degreasing similar to metal manufacturing, and degreasing of plastic products can be cleaned with solvent or partial alkaline solution containing surface surfactant. Solvent degreasing is suitable for cleaning paraffin, liquid paraffin, body fat and other organic chemical stains on the surface. Commonly used solvents can not dissolve, solubilize or crack plastic products, with low melting point, easy volatilization, no toxicity, and nonflammable. Meta alkali solution is suitable for degreasing of alkali resistant plastic products. Because there are anhydrous aluminum chloride, meta alkali salt and chemical substances that carry out specific scientific research on different surfaces in this kind of standard solution. The common surface specific compounds are OP series products, namely alkyl carboxylic acid polyoxyethylene ether, which is not easy to develop into a foam plastic and does not remain on the surface of plastic products. (2) The activity of the surface of the plastic bucket. Some plastic barrels, such as polyethylene goods and ABS goods, can also be immediately coated on the surface of plastic barrels without organic chemical air oxidation. In order to better obtain high-quality coating coverage, air oxidation solution after degreasing can also be carried out for ABS products. Thin chromic acid solution diluent can be used. The typical solution secret is 420 g/L chromic acid and 200 ml/L hydrochloric acid (1.83%). The typical treatment is 65 ℃/five minutes and ten minutes, cleaning and drying. The advantages of chromic acid etching processing: the symmetrical solution of various and complicated plastic products; Defects of chromic acid etching process: actual operation risk.
Price of plastic water tank in Weifang
The main features of the chemical plastic bucket are as follows: the product color is bright and round: the imported food grade color masterbatch is used to make the product dyed evenly and the appearance more bright and round; 2. The wall thickness of the whole barrel is uniform and symmetrical: 360 points of wall thickness control skills make the wall thickness of each barrel very uniform; 3. The appearance of the product is clean and smooth: people rely on clothes and horses rely on saddles - each one has a specialist to recheck to ensure that there are no black spots, strains, ribbons, deformation, etc. on the surface of the barrel, so as to improve the beauty; 4. Humanized planning of the whole barrel: each barrel shape fully considers the humanization at the beginning of the planning, making the products more comfortable to carry and more convenient to pour; 5. Diversified sealing methods: aluminum foil induction seal, inner plug seal, chemical foaming seal ring seal, WAKE silicone seal, EPE seal; 6. Excellent chemical stability and anti drop test: ensure the safety of product transportation, especially the transportation of hazardous chemicals; 7. High beauty of the can body: high cost performance and strict control of concave convex deformation, which conforms to the beauty of international review; 8. The first article test of the batch includes: high temperature stacking test, hydraulic leakage test, air tightness test and drop test.
Price of plastic water tank in Weifang
There are several ways to remove the residue on the plastic packaging bucket: because the plastic packaging bucket is made of PE, after using the plastic bucket, there will be a lot of oil stains on the inner wall of the bucket, and it is also very difficult and troublesome to clean. Now, Shandong Zhongcheng Packaging Co., Ltd. will introduce the method to remove the residue of plastic chemical barrels. When we remove the residue on the chemical barrel, whether using polishing water or vinegar, we should ensure that it is soaked for a long time, so as to ensure that the residue in the barrel can be removed. Find a piece of dry cloth dipped with vinegar to cover it on the chemical plastic bucket with residue. After the impurities on the bucket are soaked, use a hard small slice to easily remove the residue of trade.
