Xi'an plastic bucket It is often used in our life, but what makes us headache is the problem of variability. So how should we prevent it?

For example, when installing the seal ring on the external surface of the cylinder with a wrench, it is necessary to avoid the deformation of the seal ring after installing the seal ring on the external surface of the cylinder. If the temperature of the filled product is higher than 40 ℃, screw on the cover and chimney after the product cools down. When stacking, pay attention to ensure its flatness. The upper base layer of stacking has a large contact area. The upper base course shall be aligned. Do not misplace them to avoid Plastic water storage tank Deformation.

The weight or specific gravity of the dangerous goods contained in the chemical barrel shall not exceed the larger weight or specific gravity of the goods contained therein. Plastic drums with low hazard class shall not be used to package dangerous goods requiring high hazard class packaging. If transported in plastic drums without vents, gases will be released during storage and transportation. The single weight or volume of barreled dangerous goods shall not exceed the upper limit of the World Dangerous Goods Transport Regulations. During loading, unloading and transportation, falling and collision with hard and sharp objects shall be avoided. When loading dangerous goods, do not corrode or damage the appearance of the plastic bucket.

First of all, when filling the chemical barrel, check whether the lid and barrel of the plastic barrel are matching products, otherwise the lid and barrel are incompatible, which may lead to liquid leakage from the mouth. Liquid temperature shall not be higher than 70 ℃. The storage shall be dark, the temperature shall be below 40 ℃, and the temperature during loading and transportation shall not exceed 25 ℃.

Do not load and transport plastic packaging barrels immediately after filling with high-temperature liquid. In the process of handling the filled liquid, please do not drag the chemical bucket directly on the ground to avoid abrasion and bruise of the bottom. The correct method is to lift it with both hands or transport it with a forklift wooden pallet.