Xi'an plastic bucket Diesel oil should be packed in iron drums. From the safety point of view, the flash point of diesel oil is at the critical value of flammability and flammability, and static electricity will be generated when diesel gasoline is loaded in plastic drums and rubbed with plastic drums, which is easy to cause fire. When it is installed in a metal bucket, because the metal conducts electricity, the static electricity will be lost with the contact current of the metal bucket, which is safer. It is allowed to infiltrate a small amount of kerosene into diesel oil, but the flash point may be unacceptable.

However, it is never allowed to add gasoline to diesel oil to improve its low-temperature fluidity. It will increase the acidity value of diesel oil. The acidity value of diesel oil standing in a plastic barrel for 7 days will increase by about 40%. When diesel oil is stored in plastic drums, its distillation range will be extended, making the starting performance and working balance of diesel engine. It is prepared from diesel oil fractions produced in crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, petroleum coking and other processes.
Gasoline belongs to Class I Class A flammable liquid, its flash point is less than 28 ℃, and its lower explosive limit is less than 10%. In the process of filling, pouring or vibration of gasoline in plastic drums, gasoline and the wall of plastic drums rub against each other, and the contact potential difference generates electronic movement, resulting in positive and negative charges and static electricity. Gasoline is flammable. When gasoline is transported in plastic drums, the friction between gasoline and the drum wall during transportation makes the plastic drum charged. Since plastic is an insulating material, the charge on the drum is not easy to transfer.
Xi'an plastic bucket manufacturer It means that discharge will occur when the accumulation reaches a certain level, and sparks will ignite the gasoline, causing accidents. A large number of sheet materials with rapid growth are applied in plastic film or pool bottom village, which is based on the toughness, chemical resistance and impermeability of MDPE. The grades used for extrusion production generally have melt index less than 1 and MWD of medium width to wide width.
Plastic bucket manufacturer During processing, low MI can obtain appropriate melt strength. Every plastic container has a triangle with an arrow at the bottom, and there is a number in the triangle. Identify clearly and use reasonably. Before the rice is put into the bottle, it must be ensured that the rice is dry, and the lid should be tightened immediately after the rice is put into the bottle. This is not only neat but also economical.