Plastic water storage tank It has been widely used by thousands of households and all walks of life. It is also a common container for storing liquids. Many users reported to the manufacturer Xi'an plastic bucket It is easy to deform and damage. For this problem, Shaanxi plastic bucket manufacturer The following preventive measures are summarized. Hope that users can remember the key points after reading.

1. During handling, loading and unloading Plastic water storage tank Plastic water storage tanks should be handled carefully during daily use.

2. During storage and transportation Plastic water storage tank During the process, the ground should be flat to prevent the tank from tilting, and the tank should be broken with sharp objects. Use a rubber hammer less than 1 pound when filling and sealing the cap. First press the opening of the tear strip, and then knock off the lid evenly along the outer circumference of the top of the end. Detonation force shall not exceed 8kg. The contact between the rubber hammer and the barrel cover should be parallel and not inclined, otherwise the barrel cover will be easily broken.

3. Storage Plastic water storage tank Xi'an plastic barrels should be placed upward, no more than 5 20L plastic bucket No more than 7 10L plastic buckets and 5 5L plastic buckets.

four Plastic water storage tank They shall be stacked firmly or have sufficient support and reinforcement. Before stacking, a layer of thin plate shall be laid on every two layers of plastic barrels to avoid collision during transportation. The clapboard shall be placed vertically as far as possible and kept at a certain distance to avoid excessive stress collapse of the cylinder caused by collision during transportation and unnecessary loss.